Popular kimono essential item to make kimono dressing easier High-quality DX Korin belt
Convenient item which is used to keep your kimono's collars in place all day. Conformable and easy to wear with elastic straps!!
Multiple usage
- Stop the clip part on the collar of nagajuban
- Use it as the waist strap
- Use it as tamotojime, tasuki
You can reduce the knot from being rugged or over tightened like a waist strap.
Size
M size (about 30-58 cm)
L size (about 40-78 cm)
Color
White
Cream
Light blue
Purple
Light pink
Rose pink
Red
Design
Cloisonne pattern
"Cloisonne" means an eternal chain and expansion that never ceases, and is popular as an auspicious pattern of harmony and harmony.
Material
Fastener: 100% Polycarbonate
Woven rubber: 70% nylon, 15% polyurethane, 15% polyester
/ Material features /
The material of the "fastener" of the Korin belt is the finest resin polycarbonate.
It has moderate elasticity compared to commonly used synthetic resin or metal, and has a holding force that can be freely adapted even if it is thin.
Therefore, the clothes holder is not damaged.
Brand
Korin made in Japan
[How to attatch]
1. Adjust with the adjuster so that the length of the rubber part is slightly longer than both shoulders.
2. Insert the clip through the miyatsuguti (opening under the armpit) and fasten it to the collar in front of the bottom.
3. 3. Turn the belt from the back of your body to the right
4. Fasten the clip around the upper front collar on the right and at the same height as the lower front.
* As a guide, the position of the fastener should be around the bottom of the eight miyayatdus, and if the part to be fitted is too high above the bottom of the eight mouths, the neckline will be clogged.
[How to open and close the clip]
OPEN Open by bending the rubber loop down
CLOSE Closes when the rubber thread is leveled
- Choosing a selection results in a full page refresh.
- Press the space key then arrow keys to make a selection.